r33 line.. project making progress
4 posters
Page 1 of 1
r33 line.. project making progress
engine atm: garrett 35/40....82 rear housing, custom hi mount manifold, tial 48mm wastegate
-greddy type plenum
-ssq bov, FPR, bosch 040, nismo 550 injectors
-metal head gasket.
- FMIC water spray
engine soon- tomei springs, 270d 10.25mm lift tomei camshafts, solid lifters, eagle rods and bearings, cp pistons and rings.
driveline/handling= r200 diff, nismo front and rear strut bars, bilstien coilovers, nismo brake cylinder stopper, impul RS rims.
driveline soon- twin plate clutch... adj caster arms etc
stock turbo..vs new one
ICE= GReddy Emanage Ultimate. 7'' motorized dvd playa, 4x 350w kicker 6x9's, tweaters, 2 12'' subs, sony xplode monoblock 2500watt amp, fusion 1000watt 2-way amp, boot installed with red led's.
strobes in each wheel arch.
just took off the plenum this arvo...will have other one on by end of week
JUST WACKED IT IN
-greddy type plenum
-ssq bov, FPR, bosch 040, nismo 550 injectors
-metal head gasket.
- FMIC water spray
engine soon- tomei springs, 270d 10.25mm lift tomei camshafts, solid lifters, eagle rods and bearings, cp pistons and rings.
driveline/handling= r200 diff, nismo front and rear strut bars, bilstien coilovers, nismo brake cylinder stopper, impul RS rims.
driveline soon- twin plate clutch... adj caster arms etc
stock turbo..vs new one
ICE= GReddy Emanage Ultimate. 7'' motorized dvd playa, 4x 350w kicker 6x9's, tweaters, 2 12'' subs, sony xplode monoblock 2500watt amp, fusion 1000watt 2-way amp, boot installed with red led's.
strobes in each wheel arch.
just took off the plenum this arvo...will have other one on by end of week
JUST WACKED IT IN
Last edited by on Fri Jan 18, 2008 2:26 am; edited 2 times in total
Guest- Guest
Re: r33 line.. project making progress
new turbo looks nice man, same one I had on my vl.
btw Is this bop01?
btw Is this bop01?
Re: r33 line.. project making progress
yeh it is justin
ur ride looks awesome
that turbo is so much bigger than the stock one
cant wait till its done
ur ride looks awesome
that turbo is so much bigger than the stock one
cant wait till its done
Guest- Guest
Re: r33 line.. project making progress
lol, u still got ur throttle body there or u moving it to the front of the plenum?
or just custom piping?
or just custom piping?
Guest- Guest
Re: r33 line.. project making progress
yea dan... thats how they work...
still waiting on welder to make a TB adaptor...thats y it is taking soooo long
but will be chucking on a 100mm tb later down the line.
the plenum basically goes straight towards the front bar.
cuts out about 1-1.5m of pipework. and on a rb25 with a big turbo...that is a Godsend
still waiting on welder to make a TB adaptor...thats y it is taking soooo long
but will be chucking on a 100mm tb later down the line.
the plenum basically goes straight towards the front bar.
cuts out about 1-1.5m of pipework. and on a rb25 with a big turbo...that is a Godsend
Guest- Guest
Re: r33 line.. project making progress
looks good!
my mate has the same setup on his 25 in a r32 but with 260d cams i think. taking it down to get tuned next friday so should be intresting to see what it makes....
my mate has the same setup on his 25 in a r32 but with 260d cams i think. taking it down to get tuned next friday so should be intresting to see what it makes....
JZX83- Member
- Posts : 4
Join date : 2008-01-15
Location : sunshine coast
Re: r33 line.. project making progress
nice neat ride man, should hammer!
should fit a Rb26 dett hahah that should FLYYYYYYYYYYY
should fit a Rb26 dett hahah that should FLYYYYYYYYYYY
Tommy Lancer- OFFICAL CCC MEMBER
- Posts : 373
Join date : 2008-01-14
Age : 34
Location : Sunny Coast
Re: r33 line.. project making progress
i would have.....but didnt have a TB adapter....so am without a ride until the working week begins again
Guest- Guest
Re: r33 line.. project making progress
i know hey.
what can i say...dont get mates to do custom fabbing for ya. only + is low price.. but takes AAGGEESS
what can i say...dont get mates to do custom fabbing for ya. only + is low price.. but takes AAGGEESS
Guest- Guest
Re: r33 line.. project making progress
this car makes no power and is a heapa that belongs at sims metal
Re: r33 line.. project making progress
what was the point of that comment? he has been banned and deleted since january...........
Guest- Guest
Re: r33 line.. project making progress
no he posted 2 days ago, I just deleted it, whats the point of owning a silvia?
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|